Crane News

Understanding Crawler Crane Auxiliary Hoists

At Eagle West Crane & Rigging, we work with project managers and contractors across BC who are planning complex lifts that demand more than a straightforward single-hoist setup. Understanding crawler crane auxiliary hoists is one of those subjects that separates a well-planned lift from one that stalls on site, runs over schedule, or requires a crane swap mid-project. If you’re specifying crane requirements for an upcoming job, knowing how auxiliary hoists function and when they add genuine operational value is worth understanding before the lift plan gets written.

What an Auxiliary Hoist Actually Is

A crawler crane’s auxiliary hoist, sometimes called a whip line, is a secondary hoisting system mounted on the same machine as the main hoist. It operates independently, typically rigged at the tip of the boom rather than through the main block, which gives it a longer effective reach but a lower load capacity.

The key distinctions between the two systems:

  • Capacity: The main hoist handles the crane’s rated maximum loads. The auxiliary hoist is rated at a fraction of that capacity and is designed for lighter, more precise work.
  • Speed: Auxiliary hoists typically operate at higher line speeds than main hoists, which matters for repetitive picks or tag line management.
  • Reeving: Main hoists use multiple part lines for mechanical advantage on heavy loads. Auxiliary hoists are commonly single or two-part reeved, keeping the rigging lean for lighter lifts.
  • Reach: Since the auxiliary is rigged at boom tip rather than through a main hook block, it can access positions the main hook cannot reach as efficiently.

Both systems have their own independent load charts. Using the wrong chart for either hoist is a lift planning error, not just a paperwork issue.

Find out how crawler crane jobs extend reach on complex projects.

When an Auxiliary Hoist Earns Its Place on the Job

Not every project requires dual-hoist capability, and over-specifying crane equipment carries real cost implications. There are specific scenarios, though, where an auxiliary hoist isn’t a luxury. It’s the right tool.

Dual-Load Operations

Some structural lifts require two independent load paths at the same time. Rather than mobilizing a second crane, a crawler with auxiliary capability can handle both picks from a single machine, provided the combined loads fall within the crane’s rated capacities and the lift plan accounts for the interaction between the two systems.

Precision Placement Work

The auxiliary hoist’s higher line speed and single-part reeving make it well suited to final positioning tasks where the main block would be too cumbersome. Setting mechanical equipment into tight equipment rooms or threading structural steel through an existing opening are situations where control and maneuverability matter more than raw lifting capacity.

Tag Line and Rigging Support

On large lifts where the main hoist carries a near-capacity load, the auxiliary hoist can manage tag line work or support secondary rigging components. This keeps the lift team better organized and reduces the need for additional manual tag line crews in some configurations.

Multi-Pick Sequencing

On projects with a high volume of repetitive picks, such as precast panels, modular components, or mechanical units, an auxiliary hoist can improve cycle times by handling lighter picks while the main hoist remains configured for heavier work. Resetting reeving mid-sequence costs time. Having both systems available avoids it.

Load Charts and Lift Planning for Dual-Hoist Setups

This is where rigorous planning matters most. A crawler crane with an auxiliary hoist doesn’t operate from a single load chart. Each hoist carries its own capacity ratings, and those ratings may interact depending on the lift configuration.

Critical planning considerations include:

  • Independent chart verification: Each hoist must be evaluated against its own applicable load chart for the radius, boom angle, and load configuration in use.
  • Simultaneous load evaluation: When both hoists are in use at once, the crane’s overall stability and structural ratings must account for the combined loading. This requires engineered review, not field estimation.
  • Operator coordination: Dual-hoist operations demand clear communication protocols between the operator and signal person. Lift plans for these setups should specify those protocols explicitly rather than leaving them to onsite improvisation.
  • Rigging plan for each hoist: The rigging on the auxiliary hoist often looks different from the main hoist setup. Each needs its own rigging review as part of the overall lift plan.

This is precisely why lift planning for complex crane configurations should be done by people who know the equipment, not assembled from generic templates.

Find out if your project requires engineered rigging.

Getting the Specification Right Before the Project Starts

The decision to specify auxiliary hoist capability belongs in the planning phase. Once a crane is on site and the work scope has expanded, the options narrow quickly. We’ve seen projects delayed not because the right crane wasn’t available, but because the original equipment specification didn’t account for what the job actually required.

If you’re developing bid documents or scoping a lift that involves multiple simultaneous picks, tight placement tolerances, or high-volume repetitive lifting, bring those details to the table early. The lift planning conversation is where the right equipment configuration gets identified and where unexpected complications get resolved before they become site problems.

When your next project involves crawler crane work and you want to make sure the equipment specification is right the first time, call our team at 1-800-667-2215. We’ll work through the lift requirements with you and make sure the plan going into the job reflects the work that actually needs to get done.